Interlocking Composite Deck Tiles - 300 x 300 mm
300 × 300 MM COMPOSITE DECK TILE · MODEL JE302-2S8
Details, coverage & installation
Refresh your balcony, patio or terrace with interlocking composite deck tiles in a 300 × 300 mm (11.81 × 11.81 in) format. Choose Black, White Cream, Tan or Brown to suit your space.
What comes in one box?
- 11 tiles per box — the quantity you select is the number of boxes.
- 0.99 m² per box — approximately 10.66 sq ft.
- 0.09 m² per tile — approximately 0.9688 sq ft.
Plan your project before you order
Measure your area, check the layout and use the Tile Coverage Calculator below to estimate whole boxes with an allowance for cuts. For planning, allow 11.11 tiles/m² or 1.032 tiles/sq ft before that allowance.
Example: for 100 sq ft with a 10% cutting allowance, plan on 11 boxes. That gives you 121 tiles covering approximately 117.2 sq ft. Your layout determines the allowance you need.
Is your surface ready for deck tiles?
Install on a firm, level, clean surface that allows drainage. Leave a 5 mm perimeter expansion gap around walls and fixed objects. Check these requirements before ordering.
Know the material you are buying
Model JE302-2S8 is made with 60% wood fibre, 30% HDPE and 10% additives. The board profile is 70 × 11 mm and the reported density is 1287 kg/m³.
The technical data sheet reports slip values of 85 longitudinal / 86 lateral, average water absorption of ≤1.05% and fire classification Dfl-s1. See the technical specifications and FAQs below for these reported values and care guidance.
Care, storage and colour
Clean with water and neutral detergent. Avoid acids, alkalis, sharp objects, open flame and excessive point pressure. Store tiles flat.
Colour can vary between displays and production batches. Use the colour images as a guide when choosing your finish, and plan your full project quantity before ordering.
$0.00
/ box
300 × 300 mm Tile
Each tile measures 300 × 300 mm
(11.81 × 11.81 in.) and covers
0.09 m², approximately 0.9688 sq ft.
Reported Slip Values
Technical data reports 85 longitudinal
and 86 lateral. Actual slip performance
can vary with installed surface conditions.
Installation Surface
Install on a firm, level, clean surface
that allows drainage, with a 5 mm
perimeter expansion gap.
Water Absorption
Average water absorption is reported
at ≤1.05%. This is not a waterproof claim.
Published Composition
60% wood fibre, 30% HDPE
and 10% additives.
Dfl-s1 Classification
The reported fire classification is Dfl-s1.
This does not mean the tiles are fireproof.
Cavador Tile Studio
See your terrace transformed.
Upload a photo of your patio or balcony and explore four Cavador finishes. Tile Studio helps you picture a new surface in your space.
- Upload your space
- Choose a finish
- Preview with AI
Plan your project
Tile Coverage Calculator
Enter your total area or room dimensions to see how many tiles and boxes you'll need, including a waste allowance for cuts.
sq ft
ft
×
ft
Units
Enter your measurements to see the estimate.
0
Boxes needed
0
Tiles
0
Total coverage (sq ft)
—
Estimated total
Product Specifications
Specification
Per box
11 tiles · 0.99 m² / approximately 10.66 sq ft
Model
JE302-2S8
Dimensions
300 x 300 mm (11.81 x 11.81 in)
Board profile
70 x 11 mm
Tile coverage
0.09 m2 / approximately 0.9688 sq ft
Planning factor
11.11 tiles/m2 / 1.032 tiles/sq ft
Perimeter gap
5 mm
Care
Water and neutral detergent
Details
Composition
60% wood fibre, 30% HDPE, 10% additives
Density
1287 kg/m3
Water absorption
Average <=1.05%
Fire classification
Dfl-s1
Slip resistance
85 longitudinal / 86 lateral
Frequently Asked Questions
Install on a firm, level, clean surface that allows drainage. Leave a 5 mm perimeter expansion gap. Check that your intended surface meets these requirements before ordering.
Each box contains 11 tiles and covers 0.99 m² (approximately 10.66 sq ft). Each tile measures 300 × 300 mm (11.81 × 11.81 in). Order quantities are boxes. Use the calculator above to include your chosen cutting allowance.
Use the page calculator and allow extra material for cuts, layout adjustments and future replacements. Planning factors are approximately 11.11 tiles per m2 or 1.032 tiles per sq ft.
Clean with water and neutral detergent. Avoid acids, alkalis, sharp objects, open flame and excessive point pressure. Store spare tiles flat. Colour can vary between displays and production batches.
Lifetime WarrantyResidential coverage
Order a SampleSee it before you buy
Canada-Wide ShippingShips in 5–7 days
Easy Returns30-day window
In your space
See It Installed
Interlocking Composite Deck Tiles - 300 x 300 mm
$0.00